GSM basics tutorial and overview

The GSM system is the most widely used cellular technology in use in the world today. It has been a particularly successful cellular phone technology for a variety of reasons including the ability to roam worldwide with the certainty of being able to be able to operate on GSM networks in exactly the same way - provided billing agreements are in place.

The letters GSM originally stood for the words Groupe Speciale Mobile, but as it became clear this cellular technology was being used world wide the meaning of GSM was changed to Global System for Mobile Communications. Since this cellular technology was first deployed in 1991, the use of GSM has grown steadily, and it is now the most widely cell phone system in the world. GSM reached the 1 billion subscriber point in February 2004, and is now well over the 3 billion subscriber mark and still steadily increasing.

GSM system overview

The GSM system was designed as a second generation (2G) cellular phone technology. One of the basic aims was to provide a system that would enable greater capacity to be achieved than the previous first generation analogue systems. GSM achieved this by using a digital TDMA (time division multiple access approach). By adopting this technique more users could be accommodated within the available bandwidth. In addition to this, ciphering of the digitally encoded speech was adopted to retain privacy. Using the earlier analogue cellular technologies it was possible for anyone with a scanner receiver to listen to calls and a number of famous personalities had been "eavesdropped" with embarrassing consequences.

GSM services

Speech or voice calls are obviously the primary function for the GSM cellular system. To achieve this the speech is digitally encoded and later decoded using a vocoder. A variety of vocoders are available for use, being aimed at different scenarios.

In addition to the voice services, GSM cellular technology supports a variety of other data services. Although their performance is nowhere near the level of those provided by 3G, they are nevertheless still important and useful. A variety of data services are supported with user data rates up to 9.6 kbps. Services including Group 3 facsimile, videotext and teletex can be supported.

One service that has grown enormously is the short message service. Developed as part of the GSM specification, it has also been incorporated into other cellular technologies. It can be thought of as being similar to the paging service but is far more comprehensive allowing bi-directional messaging, store and forward delivery, and it also allows alphanumeric messages of a reasonable length. This service has become particularly popular, initially with the young as it provided a simple, low fixed cost.

GSM basics

The GSM cellular technology had a number of design aims when the development started:

• It should offer good subjective speech quality
• It should have a low phone or terminal cost
• Terminals should be able to be handheld
• The system should support international roaming
• It should offer good spectral efficiency
• The system should offer ISDN compatibility

The resulting GSM cellular technology that was developed provided for all of these. The overall system definition for GSM describes not only the air interface but also the network or infrastructure technology. By adopting this approach it is possible to define the operation of the whole network to enable international roaming as well as enabling network elements from different manufacturers to operate alongside each other, although this last feature is not completely true, especially with older items.

GSM cellular technology uses 200 kHz RF channels. These are time division multiplexed to enable up to eight users to access each carrier. In this way it is a TDMA / FDMA system.

The base transceiver stations (BTS) are organised into small groups, controlled by a base station controller (BSC) which is typically co-located with one of the BTSs. The BSC with its associated BTSs is termed the base station subsystem (BSS).

Further into the core network is the main switching area. This is known as the mobile switching centre (MSC). Associated with it is the location registers, namely the home location register (HLR) and the visitor location register (VLR) which track the location of mobiles and enable calls to be routed to them. Additionally there is the Authentication Centre (AuC), and the Equipment Identify Register (EIR) that are used in authenticating the mobile before it is allowed onto the network and for billing. The operation of these are explained in the following pages.

Last but not least is the mobile itself. Often termed the ME or mobile equipment, this is the item that the end user sees. One important feature that was first implemented on GSM was the use of a Subscriber Identity Module. This card carried with it the users identity and other information to allow the user to upgrade a phone very easily, while retaining the same identity on the network. It was also used to store other information such as "phone book" and other items. This item alone has allowed people to change phones very easily, and this has fuelled the phone manufacturing industry and enabled new phones with additional features to be launched. This has allowed mobile operators to increase their average revenue per user (ARPU) by ensuring that users are able to access any new features that may be launched on the network requiring more sophisticated phones.

GSM system overview

The table below summarises the main points of the GSM system specification, showing some of the highlight features of technical interest.

SPECIFICATION SUMMARY FOR GSM CELLULAR SYSTEM
Multiple access technology	FDMA / TDMA
Duplex technique	FDD
Uplink frequency band	933 -960 MHz (basic 900 MHz band only)
Downlink frequency band	890 - 915 MHz (basic 900 MHz band only)
Channel spacing	200 kHz
Modulation	GMSK
Speech coding	Various - original was RPE-LTP/13
Speech channels per RF channel	8
Channel data rate	270.833 kbps
Frame duration	4.615 ms